Lakota Tile Studio
Find the perfect custom tile artwork
for your client or your home!
C4713-60023Primer: Primer assembly - Mounted on left side of plotterC4810-60066Printhead: HP 11 Black PrintheadC4810-60067Printhead: HP 11 Cyan PrintheadC4812-60005Printhead: HP 11 Magenta PrintheadC4813-60004Printhead: HP 11 Yellow PrintheadC4813APrinthead: HP 11 Yellow PrintheadC7769-60164Printhead: Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheadsC6071-60167Printhead: Setup printhead kit - Used to remove air and prime the ink system (4 used)C3190-60132Pulley: Idler pulley - For main drive belt - On left end of plotter - Includes pulley, shaft and spacer5183-5268Recovery Kit: Ink system return kit (box and instructions) - For returning Scitex Latex printheads5184-2833Recovery Kit: Return kit - For returning defective Thermal InkJet rtridges - Includes box and instructionsC4714-60115Roller: Overdrive roller assembly (E-size) - Includes overdrive shaft with rollers, overdrive housing, 2 media deflectors without media button, and media deflector with media buttonC4700-60042Roller: Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder - Attached to left endC4714-60146Rollfeed Assembly: E/A0 rollfeed kit - Includes left and right housing, hubs, spindle, end caps, screwdriver, and screwsC4713-60034Sensor: Pincharm sensor assembly - Pincharm sensor assembly - Mounted on right side near the right cam journalC3190-60142Service Station: Service station assembly - Mounted behind primer assembly - Four tubes from ink separator plug into assemblyC4719-60005Spindle: E/A0 rollfeed spindle rod assembly - Includes spindle, hubs, and end capsC6239ASpindle Kit: E/A0 rollfeed spindle rod assembly for DesignJet 4xx Series - Includes spindle, hubs, and end capsC4713-60017Spittoon: Spittoon assembly - Contains absorbers which hold excess ink from cartridges - Mounts on right side of plotterC3190-80013Spring: Bail cable spring - Installed on bail cable07575-80012Spring: Bail gear support 'claw' spring - Attached between the bail engaging lever support and the bail gear assemblyC1633-80005Spring: Compression spring - Installed between pincharm assembly and bushingC4699-00016Spring: Encoder spring - Mounted under encoder strip on right encoder bracketC4713-80003Spring: Pincharm spring - Mounted on right side between chassis and the right cam journal assembly lever near the front